颜料蓝15:2
Technical parameters of Pigment blue 15:2
| 颜色索引号 | 颜料蓝15:2 |
| CAS号 | 12239-87-1 |
| 欧盟编号 | 205-685-1 |
| Chemical Group | Phthalocyanine |
| 分子量 | 611.52 |
| 分子式 | C32H15CiCuN8 |
| 酸碱度 | 7.0 |
| 密度 | 1.5 |
| 吸油量（ml / 100g）％ | 50 |
| 耐光性 | 8 |
| 耐热性 | 200（℃） |
| 耐水性 | 5 |
| 耐油性 | 5 |
| 耐酸性 | 5 |
| 耐碱性 | 5 |
| Benzene Resistance | 5 |
| Ketone Resistance | 5 |
| Soap Resistance | 5 |
| Bleeding Resistance | 5 |
| Migration Resistance | 5 |
| Density ( g/cm3) | 1.5 |
| Moisture (%) | ≤1.0 |
| Water Soluble Matter (%) | ≤1.0 |
| Oil Absorption (ml/100g) | 35-45 |
| Electric Conductivity (us/cm) | ≤400 |
| Residue on 325 mesh sieve (Wet method)PPM | ≤80 |
| Magnetic on 325 mesh sieve (Wet method)PPM | ≤8 |
| PH Value | 6.5-7.5 |
| color |  |
| 分子结构 |  |
Handling and storage
Handling:
Usual precautions for nuisance dust should be observed.
Protection against fire and explosion:
The product is non-flammable
Storage:
Store in roofed places at room temperature Keep containers tightly sealed.
Flammability Class: nor applicable.
物理和化学特性
Appearance: blue powder Odor: mild
Melting point:460℃ Relative density:1.36-1.80
Decomposition: None Flammability: see 7 handling
Molecular formula:C32H16CuN8 Molecular Weight: 576.07
Tinting strength: 95-105% of the standard Volatile matter at 105℃: 2.5%max
Soluble matter in water: 1.5% max Oil absorption:28-62%
Fastness to light:7-8 Fastness to heat(℃):200
Bleeding resistance water: 5 Bleeding resistance linseed oil:5
Bleeding resistance acid:5 Bleeding resistance alkalis:5
Bleeding resistance alcohol:5 Bleeding resistance xylone:4
Bleeding resistance ethyl acetate:4
Stability and reactivity
Hazardous decomposition products
No decomposition at proper storage and application conditions
Toxicological Information
Because of experience with product mentioned, there are no recognizable hazards for human
beings, if it is correctly used and applied.
Ecological information
Avoid filtration into waster draining or soil.
Disposal considerations
Uses should acquaint themselves with local regulations.
Disposal is usually carried out by burying at an approved tip or by incineration by a licensed
waste material processor; stack gases may need to be sorubbed (see section 5 above)
